7 Phases. Every Time.
No Shortcuts, No Exceptions.
This is the process we use on every single installation — refined across 1500+ Arizona yards. Nothing is skipped. Nothing is rushed.
Phase 1: Demo & Full Site Prep
We start by completely clearing your existing yard — removing all vegetation, old ground covers, and surface materials down to bare soil. Our team grades the site to the correct slope for drainage, and carefully exposes any underground infrastructure.
Phase 2: Compacted DG Sub-Base
This is where most budget installers cut corners — and where your lawn's longevity is decided. We spread 2–3 inches of crushed decomposed granite and compact it with a plate compactor, creating a firm, level, drainage-optimized base built specifically for Arizona's caliche and sandy soils.
Phase 3: Turf Layout & Relaxation
Your premium synthetic grass is rolled out and allowed to expand naturally in the Arizona sun for 30–60 minutes. This critical step relaxes the fibers and ensures the turf lays perfectly flat. We position it with careful attention to blade direction and stitch patterns for a seamless, natural appearance.
Phase 4: Precision Cutting & Invisible Seams
Our installers precision-cut the turf to fit your exact yard shape — any perimeter, curve, or pattern. We intentionally overcut edges by one inch along borders to allow for clean tucking. Where multiple turf sections meet, we create tight, invisible seams that disappear completely once installation is complete.
Phase 5: Full Perimeter Securing
With the turf properly positioned and cut, we secure the entire perimeter using non-galvanized turf nails or staples placed approximately six inches apart. All edges are carefully tucked and folded for a clean, professional finish. Every border is double-checked for tightness and a natural look.
Phase 6: Infill Application & Power Brushing
Before infill is applied, a power brush raises all turf blades to an upright position. Infill material is then evenly distributed throughout the turf. The infill acts as ballast to hold the turf firmly against the sub-base, and keeps the individual grass blades standing upright for that realistic, lush appearance.
Phase 7: Final Grooming, Rinse & Walkthrough
This is the phase most installers rush. We don't. We power-brush the entire surface twice, rinse every inch of the lawn, and walk the finished project with you side by side — pointing out every detail before we consider the job done. We don't leave until you're satisfied.
